Servo Systems

Knight Servo Hoist Systems are user-friendly, Intelligent Assist Devices (IAD) that provide controlled transfers of workloads by enhancing the precision and speed needed for the application. As an extension of an operator’s natural movement, this technology greatly improves the accuracy and repeatability of the application.

The inherent benefits include: elimination of wasted motion, reduced reaction time, and minimal effects of inertia with heavy loads. Servo Systems enable an operator to simply grasp the handle and move the load with instantaneous response. No button pushing required.

Standard or custom options are available to allow for various programmed product functions.

Features

CE Compliant **
Redundant chain design for safeoperation:
– Load Chain: Carries the load.
– Safety Chain: Rides along for redundancy.
Safety Rating of 125%
Standard 24 VDC, 2.5 AMPS
H5 Rated (Continuous Duty Cycle)
240 VAC, Single Phase 50/60 Hz
Illuminated Run/Stop Button
Programmable Overload Capability
Fail Safe Braking
Load Sensing, Pay Load and Handle Load
Standard Float Mode

Benefits

• Worm Style Gearbox
• Programming/ Diagnostic Communication Ports
• STO – Safe Torque Off.
• Enhanced User Interface (UI).
• Ethernet Connection.
• I/O Capabilities
– (4) Analog Inputs/ (4) Analog Outputs
– (20) Inputs/ (12) Outputs
– (12) Inputs/ (8) Outputs are free for interface controls.
• LED Status Indicators
• LED Fault Diagnostics
• Virtual Travel Limits
• Active Dampening
• Impact Limiting

Accessories

Shackle

Shackle secures fixtures and loads in-line with the Servo System chain. Used primarily for in-line handle applications. Model# EBA1213 (Shown)

Swivel Hook Shackle

Shackle secures fixtures and loads in-line with the Servo System chain. Larger opening to accommodate for Knight’s Swivel Hook. Model# EBA1269 (Shown)

Quick Connect/ Disconnect

Allows for quick connections and disconnections of fixtures or end effectors. Easily disengages by the simple pull of the release pin. Model# EBA1183 (Shown)

Replacement Chain

Replacement chain kits are electro galvanized blue chromated 4mm Steel Grade (80), Heat Treated Carburized chain. Model# EBA1171 (Shown)

Replacement Roller Chain

Replacement roller series double strand ANSI 50-2 roller chain that creates a more ergonomic operation condition. Model# EBD1547 (Shown)

Electrical Disconnect Enclosure stand

Enclosure Stand is for the mounting of the disconnect enclosures at a ergonomic positioned height. Heights are adjustable. Model# EBA1145 (Shown)

Electrical Disconnect Enclosures (3 KVA)

Converts 480VAC to 230VAC for powering the servo hoists. Enclosure provides a means to lock out the system. Model# EBA1003 (Shown)

Electrical Disconnect Enclosures (Dual)

Converts 480VAC to 230VAC for powering the servo hoists. Set up for a dual output for two servo systems. Model# EBA1086 (Shown)

Electric Coil Cable

19-pin cable provides communication from the (OCI) operator control interface module on the floor level, to the servo controls up on the rail. Model# EBA1011 (Shown)

Inline Trigger

The latest in design that includes our patented load cells with integral amplifier. The actuation trigger prevents the system from unintentional movements and provides more response. Model# EBA1304 (Shown)

Remote Two Speed w/ OCI Equipped with the same features as the

Equipped with the same features as the Inline handles. Available in single or two speed configurations with Operator Controlled Interface (OCI). Model# EBA1063 (Shown)

Two Speed Pendant

Non-programmable, electrically powered pendant that allows for (2) speed operation by compressing thumb levers. Model# EPDA9600 (Shown)

Two Speed Pendant w/ Trigger

Non-programmable, electrically powered pendant that allows for (2) speed operation by compressing thumb levers and additional trigger button. Model# EPDTA9600 (Shown)

Analog LMM / OCI

Fully programmable Load Monitoring Module (LMM) with Operator Controlled Interface (OCI). Mounted inline, and is used when an inline control handle is not a practical solution. Model# EBA1384 (Shown)

Analog LMM / Pass-Through

Fully programmable Load Monitoring Module (LMM) with Pass Through is a fully programmable analog style load monitoring module. Model# EBA1385 (Shown)

Load Cell Fixture Handle

A fully programmable load sensing handle remotely mounted inline, and is used when an inline control handle is not a practical solution. Model# EBA1141 (Shown)

Fixture Mounted OCI

A fixture mounted operator controlled interface (OCI) with illuminated buttons and a run-stop button switch. Side and rear cable attachment models available. Model# EBA1058 & EBA1226 (Shown)

Wireless Remote Control

The EBA1054 Wireless Remote by Enrange FLEX® is used to control Knight Servo Systems where wireless control is preferred. Model# EBA1054 & EBA1233 (Shown)